You can use an EMI Meter which plugs into any outlet to measure your dirty electricity levels. The unit can be turned off at the breaker panel, take readings, then turned back on to see the difference in your dirty electricity levels.

The Gen III Power Perfect Box Super Duty model has two LED lights under the main cover which illuminates when the wire-in EMF filter is working.

Complete installation instructions come with each unit and a copy can be viewed here: https://www.saticusa.com/installation-instructions

Yes, we recommend a licensed electrician to install the wire-in EMF filters. Many electricians have never heard of dirty electricity or EMI/EMF, so we recommend you tell them it is a whole-house surge protector as most electricians will know what that is and how it works. The installation of the EMF Filter should not take a licensed electrician more than 30-45 minutes.

If installed correctly, there is nothing in the Power Perfect Box product line that can harm your electrical system. They are UL (Underwriter Laboratory) listed and would not be if they could harm your electrical system.

Yes! This specific EMF Filter comes with a 10-year product replacement guarantee.

Yes, the Power Perfect Box Wire-In will provide immediate benefits through its energy management and filtering capabilities. It will provide voltage regulation, surge protection, harmonics filtering and EMF reduction both before and after solar installation. This will ensure that your electrical system provides clean, efficient power, and will result in your appliances and electronics running cooler and lasting longer.

Readings tend to be a snapshot in time. It will depend on a number of factors including what devices are running or powered on at that time. Conditions vary and can be impacted by power fluctuations as well as what the neighbors have running on their systems as electrical systems are interconnected. To test its effectiveness, try measuring it with the breaker off and with the breaker on. On rare occasions, the Power Perfect Box Wire-In EMF Filter may have been installed incorrectly. A common problem has been that the Neutral Wire from the box was installed on the Ground Bar rather than the Neutral Bar in the distribution panel.

All of us have different capabilities to sense or feel in different ways. There are those who are considered to be electrohypersensitive (EHS). These individuals are very sensitive to electromagnetic frequencies (EMF) and the related radiation. Since the Power Perfect Box Wire-In and Plug-In products filter out harmonics and reduce EMF, these individuals can sometimes “feel” the difference.

Smart meters are well known for introducing harmonics into the electrical system by nature, as well as for monitoring and potentially controlling the usage of electronic devices and appliances. These harmonics create electromagnetic interference (EMI) and electromagnetic frequencies (EMF), which lead to increased electromagnetic radiation (EMR). As a result, individuals with EHS may be especially affected by smart meters.

In addition, due to increased harmonics and related dirty energy, it appears that smart meters may actually reduce the overall efficiency of electrical systems. Many people report significantly higher electrical bills after smart meters are installed.

The Power Perfect Box Wire-In effectively filters and cleans the electricity coming in from your utility or smart meter, as well as the harmonics created within your own electrical system. This filtering not only improves power quality but also helps protect your privacy. Smart meters use various harmonics transmitted across electrical wires to query information from smart appliances, which is then communicated back to the power company. The Power Perfect Box Wire-In filters out these harmonics, thereby enhancing both power quality and privacy.

No, it doesn’t directly stop radio frequency waves. However, it’s important to understand that the electrical wiring in your home acts like a large antenna—it receives those waves and propagates them as harmonics throughout your home via the electrical system.

The Power Perfect Box Wire-In EMF Filter eliminates those harmonics and prevents them from spreading through your wiring, thereby reducing your exposure to EMF and EMR.

Your electrician has likely never seen or tested any of the Power Perfect Box Wire-In EMF Filters and may be referring to older, capacitor-based systems that are not digital in nature. The Power Perfect Box Wire-In EMF Filters do not use oil-filled capacitors; instead, they utilize harmonic rectifiers developed by NASA to filter electricity, improve efficiency, and protect electronics aboard the space shuttle.

This advanced technology has been adapted into a modern energy management system that regulates voltage, filters out harmful harmonics, and provides phase correction—making your electricity more efficient. Increased efficiency and reduced electrical consumption typically result in cost savings.

The EMF Filter has a mounting bracket on the back which can be easily attached to the wall for quick and easy install.

Yes, when installed correctly and powered on, the EMF Filter will protect everything on your electrical system from damage caused by a power surge. If the power surge is extremely powerful (a very rare occurrence), the unit is designed to self-destruct to stop the surge at the breaker panel. If this happens, we will replace the unit at no charge, provided it is under warranty and we have your warranty information on file.

Satic Shield has been in business for almost 16 years and we have over 100,000 units successfully working for satisfied customers. The units are designed to last much longer than 10 years.

No, you own the Power Perfect Box and it is your personal property.

The Gen III Power Perfect Box Super Duty Wire-In EMF Filter is 14” x 7.5” x 4”.

EMF exposure will raise body voltage to unsafe higher levels. The Power Perfect Box Wire-In EMF Filters reduce EMF and will lower body voltage.